Let’s Fix Linksys Velop Red Light Issue!
Have you tried everything to fix the Linksys Velop red light issue? And still, looking for a solution to fix the issue? Then you are at the right place here in this article we will give you effective tips and tricks to solve the issue in less time.
First, we would like to shed light on the causes that force you to face the red light on the Linksys Velop. If you know the reasons for the issue, then you will be able to fix it from the root.
Contributing Factors Linksys Velop Red Light
Well, there are tremendous causes that drag you to experience the red light on the issues. We mentioned all the contributing factors below so that you can understand properly what is going on with your Linksys Velop.
- Weak Internet Connection
- Outdated firmware
- Loose Wire Connections
- Inadequate power supply
- Broken hardware
- WiFi Interference
Thus, these are the causes behind the problem. We know that you are getting irritated by facing this red light on your Velop continuously and want to fix the issue as soon as possible. You don’t need to worry more from now onwards. After all, we have effective solutions for you that you can use to fix the issue and use the fast blazing internet speed in no time.
Fix: Linksys Red Light Issue
In some circumstances, red light issues interfere with your WiFi experience. We recommend you keep your eye on the steps outlined below to learn more about such occurrence and solve it by following the steps:
Perform Linksys Firmware Update
The foremost hack is to update the firmware of your Linksys Velop to resolve the red light issue. If you are unsure how to carry out the firmware update procedure, then follow the given steps to get started:
- Open the computer or laptop
- Launch the upgraded internet browser.
- Type the Linksys Velop default web address into the address bar.
- Press down the Enter button.
- You will be at the Linksys Velop login page.
- Fill the on-screen fields with username and password respectively.
- Click on the Login button
- Linksys Velop setup wizard will appear in front of you.
- From here you need to go to Settings > Administration > Firmware Update > Download > Install
- Now, you need to click on the Apply and save buttons.
This is how you can update your Linksys Velop firmware.
Prevent WiFi Interference
Do you know that WiFi interference impairs the performance of the Linksys Velop? If you install your Velop system near the transmitting appliance, electronic gadgets, and metal items then you need to replace your Linksys Velop as soon as possible to solve the red light issue.
This could also be the reason behind the red light. So, we suggest you install your system far away from the home appliance.
Reboot the Device
Restarting the electronic gadget is the most basic technique to solve the issue related to the device. If you still experience the red light on your device then we advise you to perform the reboot method.
Here, is how you can restart your Linksys velop:
- First, turn off your Linksys Velop and unhook it from the wall outlet.
- Take some time to fix the temporary glitches.
- Now, connect the Linksys Velop to its wall outlet, and don’t forget to turn it on.
Now, you should check the status of the light, to make sure the red light goes off or not.
However, you will not able to solve the red light issue on your Linksys velop system, and then consider performing factory default reset. To know the instructions, check out the user manual. This is to inform you that every Linksys device arrives with a user manual which consists of every detail about the product. So, whether you want to set up the device or reset it, everything is available there. For example, if you have an RE6300 extender, the instructions for Linksys RE6300 setup are available rights there in the user manual.
Conclusion,
Although Linksys Velop system is mind-blowing when it creates an issue like red light it irritates the most. But, you can solve this by following the aforementioned steps.
