Methods to Resolve Netgear Orbi Devices Not Syncing Issue
Every Orbi comes with one satellite or two satellites depending on the model. An Orbi router is nothing without its satellite as the satellite helps the router extend the WiFi in every nook and cranny of the house. Considering this, along with the usage of the Netgear Orbi admin login credentials, the basic requirement of doing Netgear Orbi setup is to connect the Netgear Orbi router to the satellite and if that is exactly what you are unable to do, then this guide is written for you.
Here, we have shed light on all the reasons that might be stopping your Orbi devices from syncing along with the solutions to resolve it in a hassle-free manner. Thus, what are you waiting? Get down to reading right away.
[Resolved] Netgear Orbi Devices Not Syncing Issue
- Restart the Netgear Orbi
Technical glitches are known to impact the performance of every third networking device thereby causing issues. Chances are that you are experiencing the Netgear Orbi router not connecting to the satellite issue because of the same reason.
That is why; it is recommended that you restart your Orbi router. Doing so will help you to get rid of the technical glitches with ease and hopefully put an end to the Netgear Orbi router not connecting to the satellite issue for you.
- Press the Sync Button
Perhaps you have not pressed the Sync button on one of the devices, i.e. the Netgear Orbi router or the Orbi satellite due to which you are stuck with the Netgear Orbi router not connecting to the satellite issue.
Taking this fact into consideration, you should press the Sync button on both networking devices. Once done, see if you are able to connect the Orbi router to the satellite. In case, you still got no luck, then follow the following hack.
- Pull the Orbi Devices Closer
How much distance is separating your Netgear Orbi router from the satellite? Is the situation such that the Orbi is kept in one corner of the house whereas the satellite is kept in another corner? Well, it looks like you found another reason behind the issue at hand.
To troubleshoot it, you ought to reduce the distance between the networking devices and you can do so by unplugging the Orbi satellite from its existing socket and plugging it into the one near the Netgear Orbi router. Trust us; this will surely be able to help you out.
- Do Factory Default Reset
Did none of the aforementioned troubleshooting hacks help you to resolve the Netgear Orbi router not connecting to the satellite issue? Nodding your head in yes? Well, in that case, your last resort is to factory reset the networking device.
There are two methods to reset the Netgear Orbi device, the manual method and the one which requires you to press the Reset button. Considering your Orbi devices are unable to sync, you can use the hard reset method to reset your device.
After resetting your Orbi, set it up again and perform Orbi firmware update. Doing so will make sure that you do not get technical issues in the future related to the Netgear Orbi router. Plus, it will enhance the performance of your Orbi.
Final Words
With the hope of being productive, we are ending our guide written on how one can resolve the Netgear Orbi devices not connecting issue. Which was the hack that helped you to connect the Netgear Orbi router to the satellite successfully?
Are you interested in sharing your answer with your fellow readers? Nodding your head in yes? Well then, do so by making use of the comment section.
