Despite their good reviews, many users have been experiencing issues with Netgear Orbi routers. Specifically, they are stuck with the Netgear Orbi white light issue. They have tried to update the firmware of their Orbi devices using the Orbi login credentials but were not able to troubleshoot the issue from the root.
Taking this into consideration, this guide has been written. Here, we have outlined various troubleshooting hacks via which you can the status of your Orbi from white to green in the blink of an eye. Thus, continue reading.
[Resolved] Netgear Orbi Blinking White Light Issue
- Check the Cable Connection
The topmost reason sitting at the shelf that might have caused the Netgear Orbi blinking white light issue is a weak cable connection. This might have occurred because the cable connecting the Netgear Orbi router and the existing modem is damaged or worn out.
In both cases, it is recommended that you replace the existing cable with a new one. Apart from doing so, keep two things in mind; the cable should be tightly connecting the devices and the ports located on them should not be damaged.
As soon as you are done following the troubleshooting hacks, consider checking if the Netgear Orbi blinking white light issue has been resolved or not. In case, not getting luck is out of your league, then follow the next troubleshooting hack.
- Move the Networking Devices Closer
If the distance between the Netgear Orbi router and the Orbi satellite is much more than required, then also you can also face the Netgear Orbi blinking white light issue. Not just this, but you can also come across the Orbi satellite not connecting issue.
To fix the first issue and prevent yourself from facing the second, it is recommended that you move the networking devices a little close to each other. We are paying emphasis on the word ‘little’ so that you do not make the mistake of keeping your devices too close.
Otherwise, their signals will clash, and forget about troubleshooting the Netgear Orbi blinking white light issue, but you will end up inviting more technical issues to the table. We are guessing that you do not want that.
- Restart the Netgear Orbi Router
Did none of the aforementioned troubleshooting hacks assist you in resolving the Netgear Orbi blinking white light issue? Well, then you are left with only one solution. It requires you to restart your Netgear Orbi router. For that, continue reading.
In order to restart your networking device, you need to power it off, unplug it from its wall socket, wait for some time, plug it back into its wall outlet, and turn it on. It is advised that you be very patient throughout the process of restarting your device.
After restarting your Netgear Orbi device, check if the LED located on it was able to help you turn the white light on your networking device to green. If it did, well and good, in case, it did not, it is recommended that you restore your device to its default mode.
After following the troubleshooting hacks mentioned in this article, you will be able to resolve the Netgear Orbi blinking white light issue. While trying to troubleshoot this issue, if you figured out another way through which it can be resolved, then do share it with your fellow readers. Perhaps, your discovery was what they needed in order to resolve the Netgear Orbi blinking white light issue. For your information, you can make use of the comment section to share the tips you are aware of with your fellow readers.